Spectrum-controls 140 EHC 204 00sc Manuel d'utilisateur télécharger pdf (Page 64)

Counter / Flow Meter Input Module

Corrective Action

If necessary, install a pull-down resistor between the channel input and channel common or a pull-up resistor

to a positive voltage source.

Module Not Recognized by Rack (ModSoft)

Possible Causes

• Module not correctly installed.

• Module runtime files not correctly installed.

Corrective Action

1. Reinstall the module in the rack. See chapter 2, “Installation and Wiring.”

2. Check the I/O map screen in ModSoft to see if the problem still exists.

3. If the module name is still marked with an asterisk (indicating a health status problem), select the

module name using the Shift+? key.

4. If the module is not listed at all, reinstall the ModSoft runtime files. See software installation

instructions in chapter 3, “Module Configuration.”

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 80 81

Pas de commentaire

Spectrum-controls 140 EHC 204 00sc Manuel d'utilisateur Page 64