Spectrum-controls 140 EHC 204 00sc Manuel d'utilisateur télécharger pdf (Page 22)

Counter / Flow Meter Input Module

3Chapter

Module Configuration

This chapter includes information on the following:

• Module addressing

• Setting up the PLC configuration software (ModSoft, Concept, and SCIOCFG)

• Making bit settings for zoom (parameter) registers

• Making bit settings for 4X configuration (output) registers

• Making bit settings for 3X data and status registers

Some configuration can be performed using the ModSoft, Concept, and SCIOCFG configuration programs.

However, many configuration steps require ladder logic to be prepared for your PLC. For these cases, module

addressing details and bit settings are provided in this chapter, while programming details are included in chapter

4, Programming.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 80 81

Pas de commentaire

Spectrum-controls 140 EHC 204 00sc Manuel d'utilisateur Page 22