Spectrum-controls 2080sc-BAC Manuel d'utilisateur télécharger pdf (Page 10)

1-2 Chapter 1: Module Overview

User’s Manual Pub. 0300274-01 Rev. A.0

web browser to access this software to configure the parameters for the module.

Configuring the communication module includes setting the User Interface

password, entering the module device address, IP address, serial baud rate, and

mapping PLC tags to BACnet tags. For complete information, refer to Chapter 3,

Configuring the Module using Software.

Power for the module is provided across the backplane. MS/TP signals from the

field side are connected to the module via the 6-pin connector (RS-485). The

Ethernet port handles BACnet/ IP traffic.

Section 1.2 Environment and Enclosure

WARNING

This equipment is intended for use in a Pollution

Degree 2 industrial environment, in overvoltage

Category II applications (as defined in IEC

publication 60664-1), at altitudes up to 2000 meters

(6562 feet) without derating.

This equipment is considered Group 1, Class A

industrial equipment according to IEC/CISPR

Publication 11. Without appropriate precautions,

there may be potential difficulties ensuring

electromagnetic compatibility in other environments

due to conducted as well as radiated disturbance.

This equipment is supplied as open-type equipment.

It must be mounted within an enclosure that is

suitably designed for those specific environmental

conditions that will be present and appropriately

designed to prevent personal injury resulting from

accessibility to live parts. The enclosure must have

suitable flame-retardant properties to prevent or

minimize the spread of flame, complying with a

flame spread rating of 5 VA, V2, V1, V0 (or

equivalent) if non-metallic. The interior of the

enclosure must be accessible only by the use of a

tool. Subsequent sections of this publication may

contain additional information regarding specific

enclosure type ratings that are required to comply

with certain product safety certifications.

In addition to this publication, see:

Industrial Automation Wiring and Grounding

Guidelines, Allen-Bradley publication 1770-4.1, for

additional installation requirements.

NEMA Standards publication 250 and IEC

publication 60529, as applicable, for explanations of

the degrees of protection provided by different types

of enclosure.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Spectrum-controls 2080sc-BAC Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de mesure Spectrum-controls 2080sc-BAC