Spectrum-controls 1794sc-IF8IU Manuel d'utilisateur télécharger pdf (Page 30)

3-4 Flex™ IO Isolated Universal Input Module

User'sManualPub.0300231‐01Rev.A

3. Configure the local Ethernet bridge module.

3.3.2 Add a Remote Ethernet Flex Adapter

After you have added the local Ethernet communication module, you must add remote

Ethernet communication modules. A remote Ethernet module is a module that resides in a

separate chassis from the controller.

Attention

If you plan to use the Flex Control Net adapter, you will need to install

the 1794sc-IF8IU EDS file before scheduling the network. The latest

EDS files can be found at (www.spectrumcontrols.com).

1. Select a New Module for the I/O Configuration.

Name the module

Select the module’s slot number

Enter IP address of ENBT

Select the module’s revision

level

Select electronic keying level

Click OK

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 55 56

Pas de commentaire

Spectrum-controls 1794sc-IF8IU Manuel d'utilisateur Page 30