Spectrum-controls 1746sc-CTR4 Manuel d'utilisateur télécharger pdf (Page 49)

Chapter 5: Ladder Program Examples 49

In order to clear the factored data 0 must be loaded into the Preset / K

Factor, Limit / M Factor and Limit / R Factor registers. After entering 0

into these registers bit 15 of the module Configuration register

must be toggled from 0 to 1 and then back to 0.

There are 4 registers assigned for each Channels output configuration

word. The first register assigned is the channel configuration register.

The next 3 registers are the Preset / K Factor, Limit / M Factor and Limit

/ R Factor registers respectively.

Refer to Page 24 for detailed information regarding the output

configuration registers and their functions.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 65 66

Pas de commentaire

Spectrum-controls 1746sc-CTR4 Manuel d'utilisateur Page 49