Spectrum-controls 1734sc-IF4U Manuel d'utilisateur télécharger pdf (Page 26)

3-4 Point IO™ 4 Channel Universal Analog Input Module

User’s Manual Pub. 0300266-01 Rev. A

3.) Configure the local Ethernet bridge module.

3.3.2 Add a Remote Ethernet Point IO Adapter

After you have added the local Ethernet communication module, you must add remote

Ethernet communication modules. A remote Ethernet module is a module that resides in a

separate chassis from the controller.

Attention

If you plan to use the 1734 Control Net adapter, you will need to install

the 1734sc-IF4U EDS file before scheduling the network. The latest

EDS files can be found at (www.spectrumcontrols.com).

1.) Select a New Module for the I/O Configuration.

Name the module

Select the module’s slot number

Enter IP address of ENBT

Select the module’s revision

level

Select electronic keying level

Click OK

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 49 50

Pas de commentaire

Spectrum-controls 1734sc-IF4U Manuel d'utilisateur Page 26