Spectrum-controls 140 ACI 051 00sc Manuel d'utilisateur télécharger pdf (Page 10)

Installation Instructions

32-Channel Analog Input Module

Quantum Series 140 AxI 05x 00sc

Chapter 2

MODULE SETUP FOR MODSOFT

2.1 General Information

Six steps must be performed in order to fully configure the Quantum

system in preparation for using the AxI 05x 00sc:

Step 1: Modsoft programming software must be updated so that the

140 AxI 05x 00sc is recognized in the software (see Section 2.2).

Step 2: Select the appropriate slot location using the Modsoft I/O map.

Choose the first 3x and 4x level registers to be used in the

system for the module’s data, configuration and status informa-

tion (see Section 2.3).

Step 3: Zoom screens for the module must be set to match application

requirements (see Section 2.4).

Step 4: The 4x configuration register must be set to meet application

requirements (see Section 4.1).

Step 5: Module status information is available to you. The various

options must be understood and chosen to meet your application

requirements (see Section 4.2 and Section 4.3).

Step 6: Ladder rungs must be written to demultiplex the incoming 8 data

registers to 32 user selected data registers (see Section 6.3).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 56 57

Pas de commentaire

Spectrum-controls 140 ACI 051 00sc Manuel d'utilisateur Page 10